Storage
DANGER
Danger due to fluids which are hazardous to health!
Danger of bacterial infection!
- Disinfect the mixer after removal.
- Observe the specifications of the work regulations.
WARNING
Risk of injury from sharp edges!
Sharp edges can form on the propeller blades. There is a danger of cuts and similar injuries!
- Wear protective gloves!
CAUTION
Total damage from to moisture ingress
Moisture ingress in the connection cable damages the connection cable and the mixer! Never immerse the end of the connection cable in a fluid and firmly seal it during storage.
- Securely position the mixer horizontally on a firm bearing surface.
- Secure the mixer against falling over and slipping.
- Do not set the mixer down on the propeller. In the case of larger propeller diameters, ensure an appropriate platform is provided.
- Store the mixer for a maximum of one year. Contact customer service before storing the device for more than one year.
- Storage conditions:
- Maximum: -15 to +60 °C (5 to 140 °F), max. humidity: 90 %, non-condensing.
- Recommended: 5 to 25 °C (41 to 77 °F), relative humidity: 40 to 50 %.
- Protect the mixer from direct exposure to sunlight. Extreme heat can cause damage!
- Do not store the mixer in rooms in which welding work is carried out. The resulting gases or radiation can corrode the elastomer parts and coatings.
- Protect the connection cable against kinking and damage. Maintain a constant bend radius!
- Turn the propeller at regular intervals (twice a year). This prevents the bearings from jamming and renews the lubrication film on the mechanical seal.